Njp-7800c Automatic Capsule Filling Machine for Oily Liquid, Solution, Suspension

• Customization: Available
• After-sales Service: Online Support,video Technical Support
• Certification: CE, GMP, ISO
• Model NO.: NJP-7800C
• Customized: Non-Customized
• Fill Range: 00#, 0#, 1#, 2#, 3#, 4#
• Filling Principle: Volumetric Filling
• Machine Type: Capsule Filling Machine
• Main Material: Stainless Steel
• Voltage: 380/220V 50Hz
• Filling Capacity: 468000PCS Per Hour
• Weight: 3500kg
• Total Power: 13kw
• Segment Bores: 55 Holes
• Vacuum: 120m 3 /H -0.04-0.08MPa
• Dust Collector: 24.5kpa 210m3/H
• Air Compression: Air Consumption 12m3/H Pressure 0.3-0.4MPa
• Operating Noise: <75dB(a)
• Filling Percentage: Empty Capsule 99.9% Filled Capsule 99.8%
• Capsule Size: #00-#5 Safety Capsule a-E
• Suitable for: Powder, Granule, Pellet, Tablet
• Working Relative Humidity: 40-55%
• Transport Package: Wooden Case
• Specification: 1880X1390X2400mm
• Trademark: D-top
• Origin: China
• HS Code: 842240000

Product Description

Automatic Pharmaceutical Capsule Filling Machine
The NJP-7800C automatic capsule filling machine produced by our company is the innovative product of the third generation after many times of innovations and improvements. The new product is equipped with advanced technologies and perfect configuration. It not only covers all the functions and effects of the domestic capsule filling machine of the same model, but also has five pieces of innovation, three of which has been issued the utility model patent certificate by the national intellectual property administration, PRC at May 11, 2016. The innovative NJP-7800C automatic capsule filling machine, whose performance and quality has reached the top level in domestic industry, has passed the inspection of Zhejiang Packaging Machinery Product Quality Inspection Center.

Product Parameters

Technical Parameters	Specifications	NJP-7800C type
	Maximum yield	468000 grains/hour
	machine weight	35 00 kg
	Machine volume	1880 × 1390 × 2400mm (height with automatic powder feeder: 2910mm)
	power supply	380/220V 50Hz
	total power	13kw
	Number of holes	55 holes
	Vacuum	120m ^3/h -0.04~-0.08MPa
	vacuuming	24.5Kpa 210m³/h
	compressed air	Air consumption 12m³/h Pressure 0.3~0.4MPa
	source of water	Water flow 1000L/h 0.3~0.4Mpa
	water requirements	The water ring vacuum pump and the water tank are recycled, and the water source can be connected externally
	working noise	≤78dBA
	Working temperature	21°C±3°C
	working relative humidity	40-55%
	Capsule on chance	Empty capsule ≥ 99.9% Full capsule ≥ 99.8%
	Adapt Capsules	00#-5# capsule
	Loading accuracy	Western medicine ±3% Traditional Chinese medicine ±4%
	Adapt to the filling range	Powder, Granule, Pellet, Tablet
	special function	Powder collector function
	Material	316 stainless steel is used for parts in direct contact with medicines
	specification	Fully sign cGMP requirements

 

Detailed Photos

New powder hopper
It adopts the disc valve feeding method and is equipped with a vibration device. It solves the problem that the traditional screw feeding device has no fluidity and often fails to feed powders with poor fluidity such as Chinese herbal medicines and proprietary Chinese medicines. Easy to disassemble, easy to replace and clean.

Sowing Rack
The new capsule broadcasting frame adopts guide rail transmission mechanism, which has high operation precision and long service life. The closed design prevents waste capsules and dust from entering, ensuring fast and orderly capsule broadcasting and accurate capsule orientation.
 

New Turntable
The frame of the 12-station turntable adopts one-piece processing, which has a compact structure and no splicing gaps, and has good sealing and easy disassembly; the upper and lower modules move independently, and the shaft seal of the fixed bracket adopts a double-lip skeleton dust-proof ring to achieve No noise, small size, small load, high precision. The interior of the fully enclosed rotary table is free of maintenance, oil, maintenance and powder for three years. Patent No.: (ZL 2015 2 1021530.0)

Filling combination
Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4)
 

Base of filling station
The base of filling station is designed with negative pressure room, which is connected to the powder recycler. During the operation, any powder entering into the base will be inhaled into the powder recycler device by the negative pressure. The powder recycled will be used again after being filtered, preventing drug powder wasting and losing.

New capsule release mechanism
The new-type finished capsule discharge mechanism exclusively adopts the capsule plate design, no external air source is required when the finished capsules are discharged, and there is no dust flying during the production process. , strong permanent usability, less wear and tear.
 

Capsule lock mechanism
The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod.

 

New suction seat
A soft sealing column is installed on the original suction seat, and the balance between the lower mold and the suction seat is automatically adjusted by the soft sealing column during the production process to prevent vacuum leakage and increase the rate of capsule separation.
 

Clean die hole device
Purified compressed air and intermittent gas impingement technology are adopted. It solves the problem of powder sticking to the mold and improves the probability of capsule loading.
 

 

New transmission system
Adopt the latest cam bottom transmission system, the transmission bracket runs through the top and bottom of the design, all the running cams use inner groove cams instead of honest outer cams, and the high-speed operation achieves precision, accuracy, stability and no noise

Powder recycle
Negative pressure technology is adopted, and the medicine powder independent shunt system is used to shunt and recycle a small amount of leaked medicine powder in the filling base and the medicine powder in the integrated medicine powder inhaler during the production process, so as to ensure that the medicine powder will not cause cross-contamination with the recycled waste capsules. The powder can be directly re-entered into the machine for production without disinfection

Packaging & Shipping

 

Company Profile

 

FAQ

Q1:Are you a dealer or manufacturer?
A1:We are manufacturer,Our Factory was located in Guangzhou, And we are the foreign trading department for this factory but with new company name.

Q2:How I can know the machine is suitable for me?

A2:You can send us the photo or video of the design and products you want to make. We will suggest you the machine and send you the similar machine working video.If you can send us the samples will be perfect.We can test on our machine and make you a video.

Q3: How about the after service and guarantee period
A3: We make the warranty of 12 months from the machine's arrival in buyer's facility. With a professional team of experienced technicians, we can serve abroad and do the best after-sale service to assure the machine's perfect operation.

Q4How can I trust you for the first transaction?
Q4: Please note that our above business licenses and certificates. And if you don't trust us, we can use Trade Assurance service. it will protect your money during the whole transaction.