| Customization: | Available |
|---|---|
| After-sales Service: | Online Support,video Technical Support |
| Certification: | CE, GMP, ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | NJP-200C |
| Filling capacity | 12000pcs per hour |
| Weight | 600Kg |
| Dimension | 980×710×1880mm |
| Power supply | 380/220V 50Hz |
| Total power | 3KW |
| Segment bores | 2 holes |
| Vacuum | 20m3/h-0.04-0.08Mpa |
| Dust collector | 17.6Kpa 180m3/h |
| Air compression | Air consumption 4m3/h Pressure 5-7Kg |
| Operating noise | <75DB(A) |
| Filling percentage | Empty capsule 99.9% filled capsule 99.8% |
| Capsule size | 00,0,1,2,3,4,5# safety capsule A-E |
| Filling accuracy | Western medicine ±3% Chinese medicine ±4% |
| Suitable for | Powder, Granule, Pellet, Tablet. |
|
New powder hopper The new hopper adopts butterfly valve-type powder feeding, and is very suitable for drug powder with poor liquidity, including Chinese herbal medicine and Chinese patent drug, due to that its vibration unit equipped will force the powder to run down, which has solved problem of failing to feed in powder that often happens in the traditional screw feeding device because of the poor liquidity of powder. |
|
Frame of capsule separation station The newly designed frame of capsule separation station uses transmission of guide rail, enjoying higher precision and longer service life. Its closed design can prevent the defective capsule and dust from entering, ensuring a rapid and orderly capsule separation, as well as accurate capsule orienting. |
|
New turntable The new rotary table is designed fully enclosed and with concept of modularization. Its super low station designed, equipped with imported Silicone ring, provides a very good anti-dust effect. It can prevent drug powder from entering the rotary table's inner cavity, ensuring maintenance-free and lubrication charging-free for the inside part. It operates with high stability and accuracy, and meets the requirements of two-in-one filling process. (Paten code: ZL 2015 2 1021530.0) |
|
Drug filling unit Modular design and positioning by pins for clamper of filling allow adjusting the filling dosage without need to stop the machine. The filling pipe of different size can be changed conveniently and rapidly. (Paten code.: ZL 2015 2 1021519.4) |
|
Base of filling station The base of filling station is designed with negative pressure room, which is connected to the powder recycler. During the operation, any powder entering into the base will be inhaled into the powder recycler device by the negative pressure. The powder recycled will be used again after being filtered, preventing drug powder wasting and losing. |
|
Integrated powder aspirator When the abnormal capsules are failed to be separated properly, powder entering the lower holes of filling station will be absorbed into powder aspirator by recycling device, completely stopping the powder from scattering onto the platform, avoiding drug powder wasting and losing. |
|
Capsule locking device The slot type capsule locking plate is adjustable with high flexibility, it can slightly adjust at any time the misplacement in capsule locking, without need to adjust the pull rod of the station. |
|
Die hole cleaning device Use purified compressed air and intermittent gas shock technology to solve the issue that sticky powder with strong hygroscopicity will often stick onto the upper and lower die holes during production, which will cause the failure of proper separation of capsule. This will improve effectively the loading rate of capsule. |
){kind=link}